Description
Simpson THDB62612HMGF1
The Titen HD 5/8″ x 6-1/2″ Mechanically Galvanized Heavy-Duty Screw Anchor is designed for high-strength anchoring in cracked and uncracked concrete and masonry.
Simpson THDB62612HMGF1 Includes
- (1) Titen HD 5/8″ x 6-1/2″ Mechanically Galvanized Heavy-Duty Screw Anchor
Simpson THDB62612HMGF1 Features
- Head-stamped for easy identification
- Serrated teeth on the tip facilitates cutting and reduces installation torque
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes, hole size equals anchor size
- Specialized heat-treating process creates tip hardness for better cutting without compromising ductility
- Hex washer head requires no separate washer, unless required by code
- Fully and easily removable
- Code listed for exterior applications
Simpson THDB62612HMGF1 Applications
- Anchorage Solutions: Ideal for securing fixtures to concrete and masonry surfaces.
- Temporary Applications: Easily removable for temporary anchoring needs.
- Pressure-Treated Wood Applications: Suitable for interior pressure-treated wood sill plates.
- Structural Applications: Used in sill plates, ledgers, post bases, seating, and holdown applications.
Simpson THDB62612HMGF1 Installation Overview
- Drill a hole in the base material using a carbide drill bit of the same diameter as the anchor.
- Insert the anchor through the fixture and into the hole.
- Tighten the anchor into the base material until the hex-washer head contacts the fixture.
Simpson THDB62612HMGF1 Specifications
| Diameter | 5/8″ |
| Finish | Mechanically Galvanized |
| Length | 6-1/2″ |
| Material | Carbon Steel |
| Drill bit size | 5/8″ |
| Drive type | 15/16″ Hex |
| Fixture hole size | 3/4″-13/16″ |
| Head type | Hex Head |
| Quantity | 1 |
NOTE: The correct fasteners installed in the correct position must be used to achieve published load values
Reviews
There are no reviews yet.